Tone Profile

The lead guitar has a slightly overdriven and distorted sound with a vintage vibe, reminiscent of classic rock tones. It's gritty and raw, with a touch of fuzz and sustain.

Signal Chain

Recording Notes

• The guitar was likely recorded in a well-treated studio environment.
• The amplifier was probably cranked up to achieve the desired overdrive and sustain.
• A close-mic'd dynamic microphone (like an SM57) would have been used to capture the raw sound of the cabinet.
• The fuzz was used sparingly, adding thickness and saturation to the sound without making it too muddy.
• The original recording likely involved experimentation with microphone placement and gain staging to find the sweet spot for the guitar tone.

Recreation Tips

• Start with a guitar equipped with humbucker pickups to capture the thick, warm tone.
• Use a fuzz pedal (such as a Fuzz Face) to add some saturation and sustain to the tone.
• Experiment with different amplifier settings and microphone placements to fine-tune the sound.
• Adjust the gain and tone controls on your guitar and amplifier to get the right balance between clarity and distortion.
• A touch of compression can help to even out the dynamics and add sustain to the guitar signal.

Original Gear

ToneDB may earn a commission from purchases made through these links.

• Gibson Les PaulShop on Reverb(guitar)
• Marshall JTM45Shop on Reverb(amp)
• Shure SM57Shop on Reverb(mic)
• Fuzz FaceShop on Reverb(pedal)