Tone Profile

Aggressive and sharp, this tone features a tight low-end and searing high frequencies, perfect for driving heavy riffs and powerful chords. It's a classic metal sound with a slightly scooped midrange that allows it to cut through the mix.

Production Credits

Signal Chain

Recording Notes

• The guitar was likely recorded with the amplifier cranked to achieve a saturated, overdriven tone.
• A dynamic microphone, such as the Shure SM57, was probably placed close to the speaker cone to capture the raw power of the amplifier.
• Given the era and style, it's possible that the amp was run hot and the signal was compressed slightly during mixing to enhance sustain and punch.
• EQ was likely applied during mixing to tighten the low end and enhance the high frequencies for clarity.

Recreation Tips

• Start with a Gibson Les Paul style guitar with humbucker pickups for a thick, powerful sound.
• Use a Marshall JCM800 amplifier or a similar high-gain amp to achieve the core distortion tone.
• Experiment with different microphone placements to find the sweet spot on the speaker cone that captures the desired aggression.
• Use a dynamic microphone like the Shure SM57 for its ability to handle high sound pressure levels.
• Apply slight compression to the guitar track to enhance sustain and punch.
• Use EQ to scoop out some of the midrange frequencies and boost the highs for added clarity and cut.
• Consider adding a touch of chorus or delay to thicken the sound slightly.

Original Gear

• Gibson Les Paul(guitar)
• Marshall JCM800(amp)
• Shure SM57(mic)