What guitar did Radiohead use on Jigsaw Falling Into Place?

The rhythm guitar part was recorded using a Fender Telecaster. This guitar's bright, cutting tone works perfectly with the Vox AC30's natural compression and slight overdrive for this track's urgent feel.

How to get Radiohead's chorus tone on Jigsaw Falling Into Place?

A Boss CE-1 chorus pedal was used to create the subtle movement and texture in the rhythm guitar. Set the chorus to a moderate depth and slow rate to avoid making it too obvious or distracting from the urgent rhythm.

What amp did Radiohead use for In Rainbows recording?

For 'Jigsaw Falling Into Place,' they used a Vox AC30 amplifier set to slight overdrive. The AC30's natural tube compression and EL84 tube character provides the warmth and clarity heard on this track.

Where was Radiohead In Rainbows recorded?

The album was recorded at Harcourt House in Oxford, UK, which is Radiohead's own studio. Nigel Godrich served as both producer and engineer for the sessions.

What microphone was used to record Radiohead guitar tones?

A Neumann U87 large diaphragm condenser microphone was used to capture the guitar amp. The recording also incorporated room ambience alongside the close-miked amp sound for added depth and space.

rhythm guitar from "jigsaw falling into place" by radiohead

jigsaw falling into place

radiohead

rhythm guitar

75% ai confidence

Tone Profile

A bright and slightly overdriven rhythm guitar tone with a subtle chorus effect, creating a sense of urgency and texture.

Shop This Rig

ToneDB may earn a commission from purchases made through these links.

Fender Telecaster(instrument)
Vox AC30(amp)
Neumann U87(microphone)
Boss CE-1(processing)

The Story

The rhythm guitar on 'Jigsaw Falling Into Place' was recorded at Radiohead's own Harcourt House studio in Oxford, with Nigel Godrich producing and engineering. The tone was achieved using a Fender Telecaster through a Vox AC30 amplifier, captured with a Neumann U87 microphone. The signal chain included a Boss CE-1 chorus pedal, which adds the characteristic subtle movement and texture to the slightly overdriven rhythm part.

Production Credits

Producer: Nigel Godrich

Engineer: Nigel Godrich

Recorded at: Harcourt House (Oxford, UK)

Signal Chain

Instrument: Fender TelecasterShop on Reverb

Amp: Vox AC30Shop on Reverb

Microphone: Neumann U87Shop on Reverb

Processing: Boss CE-1Shop on Reverb

Recreation Tips

Start with a Fender Telecaster into a Vox AC30 amplifier.
Dial in a slightly overdriven tone on the amp, aiming for a balance between warmth and clarity.
Add a chorus effect (Boss CE-1) to thicken the sound and create a sense of motion.
Experiment with microphone placement to capture a blend of direct amp sound and room ambience.

Original Gear

ToneDB may earn a commission from purchases made through these links.

Substitutions & Recommendations

Boss CE-2W Waza Craft ChorusShop on Reverb$150-$170

Alternative to: Boss CE-1 chorus

Modern reissue of the classic CE series with vintage and modern modes, maintaining the warm analog chorus character

Vox AC30C2Shop on Reverb$1200-$1400

Alternative to: Vox AC30 amplifier

Current production AC30 with authentic vintage tone and natural breakup characteristics at moderate volumes

Audio-Technica AT4050Shop on Reverb$500-$600

Alternative to: Neumann U87 microphone

Large diaphragm condenser with similar warmth and detail capture for guitar amps at a more accessible price point

Universal Audio OX Amp Top BoxShop on Reverb$1400-$1600

Alternative to: Vox AC30 amplifier

Allows using real tube amps at low volumes with professional recording capabilities and room simulation

Strymon Iridium with TimelineShop on Reverb$650-$750

Alternative to: Boss CE-1 chorus and Vox AC30

Provides authentic AC30 modeling plus high-quality chorus effects for direct recording setup

Sources

Frequently Asked Questions

Community Insights

No community insights yet. Be the first to contribute!

TONEDB...

rhythm guitar from “jigsaw falling into place” by radiohead | ToneDB